Search results
1 – 10 of 647Xue Xinhua, Zhang Wohua and Xingguo Yang
The paper aims to clarify the relationship between the micro-structures of porous media and the coefficient of permeability. Most materials involve different types of defects like…
Abstract
Purpose
The paper aims to clarify the relationship between the micro-structures of porous media and the coefficient of permeability. Most materials involve different types of defects like caves, pores and cracks, which are important characters of porous media and have a great influence on the physical properties of materials. To study the seepage mechanical characteristics of damaged porous media, the constitutive model of porous media dealing with coupled modeling of pores damage and its impact on permeability property of a deforming media was studied in this paper.
Design/methodology/approach
The paper opted for an exploratory study using the approach of continuum damage mechanics (CDM).
Findings
The paper provides some new insights on the fluid dynamics of porous media. The dynamic evolution model of permeability coefficient established in this paper can be used to model the fluid flow problems in damaged porous media. Moreover, the modified Darcy's law developed in this paper is considered to be an extension of the Darcy's law for fluid flow and seepage in a porous medium.
Research limitations/implications
Owing to the limitations of time, conditions, funds, etc., the research results should be subject to multifaceted experiments before their innovative significance can be fully verified.
Practical implications
The paper includes implications for the development of fluid dynamics of porous media.
Originality/value
This paper fulfils an identified need to study the relationship between the micro-structures of porous media and the coefficient of permeability.
Details
Keywords
R.W. Lewis, R.S. Ransing, W.K.S. Pao, K. Kulasegaram and J. Bonet
Over the past 20 years, casting process simulation has been an active area of research. The simulation techniques are either based on solving governing partial differential…
Abstract
Over the past 20 years, casting process simulation has been an active area of research. The simulation techniques are either based on solving governing partial differential equations using numerical schemes such as the finite element or finite difference methods, or a variety of heuristically based geometry driven methods. Numerical methods are more accurate, but geometry driven methods are computationally less expensive. This paper explores two alternative techniques to overcome some of the limitations of traditional numerical simulation schemes for the casting process simulation. The first technique uses a geometric transformation method known as the medial axis transformation, to predict hot spots whereas the second technique, based on meshless methods, is used for simulating the mould filling process.
Details
Keywords
Mehdi Mosharaf-Dehkordi and Hamid Reza Ghafouri
The purpose of this paper is to present detailed algorithms for simulation of individual and group control of production wells in hydrocarbon reservoirs which are implemented in a…
Abstract
Purpose
The purpose of this paper is to present detailed algorithms for simulation of individual and group control of production wells in hydrocarbon reservoirs which are implemented in a finite volume-based reservoir simulator.
Design/methodology/approach
The algorithm for individual control is described for the multi-lateral multi-connection ones based on the multi-segment model considering cross-flow. Moreover, a general group control algorithm is proposed which can be coupled with any well model that can handle a constraint and returns the flow rates. The performance of oil production process based on the group control criteria is investigated and compared for various cases.
Findings
The proposed algorithm for group control of production wells is a non-optimization iterative scheme converging within a few number of iterations. The numerical results of many computer runs indicate that the nominal power of the production wells, in general, is the best group control criterion for the proposed algorithm. The production well group control with a proper criterion can generally improve the oil recovery process at negligible computational costs when compared with individual control of production wells.
Research/limitations/implications
Although the group control algorithm is implemented for both production and injection wells in the developed simulator, the numerical algorithm is here described only for production wells to provide more details.
Practical/implications
The proposed algorithm can be coupled with any well model providing the fluid flow rates and can be efficiently used for group control of production wells. In addition, the calculated flow rates of the production wells based on the group control algorithm can be used as candidate solutions for the optimizer in the simulation-optimization models. It may reduce the total number of iterations and consequently the computational cost of the simulation-optimization models for the well control problem.
Originality/value
A complete and detailed description of ingredients of an efficient well group control algorithm for the hydrocarbon reservoir is presented. Five group control criteria are extracted from the physical, geometrical and operating conditions of the wells/reservoir. These are the target rate, weighted potential, ultimate rate and introduced nominal power of the production wells. The performance of the group control of production wells with different group control criteria is compared in three different oil production scenarios from a black-oil and highly heterogeneous reservoir.
Details
Keywords
Yanqing Li, Daming Li, Shean Bie, Zhichao Wang, Hongqiang Zhang, Xingchen Tang and Zhu Zhen
A new coupled model is developed to simulate the interaction between fluid droplet collisions on discrete particles (DPs) by using mathematic function.
Abstract
Purpose
A new coupled model is developed to simulate the interaction between fluid droplet collisions on discrete particles (DPs) by using mathematic function.
Design/methodology/approach
In this model, the smoothed particle hydrodynamics (SPH) is used based on the kernel function and the time step which takes into consideration to the fluid domain in accordance with the discrete element method (DEM) with resistance function. The interaction between fluid and DPs consists of three parts, which are repulsive force, viscous shear force and attractive force caused by the capillary action. The numerical simulation of droplet collision on DPs presents the whole process of droplet motion. Otherwise, an experimental data were conducted to record the realistic process for verification.
Findings
The comparison result indicated that the numerical simulation is capable of capturing the entire process for droplet collision on DPs.
Research limitations/implications
However, based on the difference of experimental environment, type of the DP and setups, the maximum spreading dimeters of could not fit the experimental data exactly.
Originality/value
In sum, the coupled SPH-DEM method simulation shows that the coupled model of SPH-DEM developed an entire effectiveness process for fluid–solid interaction problem.
Details
Keywords
Mengyao Fan, Xiaojing Ma, Lin Li, Xinpeng Xiao and Can Cheng
In this paper, the complex flow evaporation process of droplet impact on the liquid film in a horizontal falling film evaporator is numerically studied based on smoothed particle…
Abstract
Purpose
In this paper, the complex flow evaporation process of droplet impact on the liquid film in a horizontal falling film evaporator is numerically studied based on smoothed particle hydrodynamics (SPH) method. The purpose of this paper is to present the mechanism of the water treatment problem of the falling film evaporation for the high salinity mine water in Xinjiang region of China.
Design/methodology/approach
To effectively characterize the phase transition problem, the particle splitting and merging techniques are introduced. And the particle absorbing layer is proposed to improve the nonphysical aggregation phenomenon caused by the continuous splitting of gas phase particles. The multiresolution model and the artificial viscosity are adopted.
Findings
The SPH model is validated qualitatively with experiment results and then applied to the evaporation of the droplet impact on the liquid film. It is shown that the larger single droplet initial velocity and the smaller single droplet initial temperature difference between the droplet and liquid film improve the liquid film evaporation. The heat transfer effect of a single droplet is preferable to that of multiple droplets.
Originality/value
A multiphase SPH model for evaporation after the droplet impact on the liquid film is developed and validated. The effects of different factors on liquid film evaporation, including single droplet initial velocity, single droplet initial temperature and multiple droplets are investigated.
Details
Keywords
Qian Li, Weihua Cai, Xiaojing Tang, Yicheng Chen, Bingxi Li and Ching-Yao Chen
The aim of this study is to numerically simulate the density-driven convection in heterogeneous porous media associated with anisotropic permeability field, which is important to…
Abstract
Purpose
The aim of this study is to numerically simulate the density-driven convection in heterogeneous porous media associated with anisotropic permeability field, which is important to the safe and stable long term CO2 storage in laminar saline aquifers.
Design/methodology/approach
The study uses compact finite difference and the pseudospectral method to solve Darcy’s law.
Findings
The presence of heterogeneous anisotropy may result in non-monotonic trend of the breakthrough time and quantity of CO2 dissolved in the porous medium, which are important to the CO2 underground storage.
Originality/value
The manuscript numerically study the convective phenomena of mixture contained CO2 and brine. The phenomena are important to the process of CO2 enhanced oil recovery. Interesting qualitative patterns and quantitative trends are revealed in the manuscript.
Details
Keywords
A. Karimi, H. Naderan, M.T. Manzarii and S.K. Hannani
This paper aims to perform a comparative study between capabilities of two numerical schemes from two main branches of numerical methods for solving hyperbolic conservation…
Abstract
Purpose
This paper aims to perform a comparative study between capabilities of two numerical schemes from two main branches of numerical methods for solving hyperbolic conservation equations.
Design/methodology/approach
The accuracy and performance of a newly developed high‐resolution central scheme vs a higher‐order Godunov‐based method are evaluated in the context of black‐oil reservoir simulations. Both methods are modified enabling study of applications that are not strictly hyperbolic and exhibit local linear degeneracies in their wave structure.
Findings
The numerical computations show that while both schemes produce results with virtually the same accuracy, the Godunov method reproduces slightly more accurate results at the expense of calculation of eigen‐structures.
Research limitations/implications
The paper investigates only one dimensional problems, but the idea can be easily extended to multi‐dimensional problems.
Practical implications
The paper shows the strengths and weaknesses of two practical numerical methods.
Originality/value
Such comparative study has not been published elsewhere and in particular, the performance of numerical methods on simulating hysteresis effect in hydrocarbon reservoirs has not been investigated in detail before.
Details
Keywords
Xing Han, Haitao Zhang, Bo Shao, Dongtao Wang, Longgang Cheng, Yadong Guo, Ke Qin and Jianzhong Cui
The purpose of this paper is to investigate the influence of sprue distributions on the flow field and temperature field of the cladding casting process and verify the simulation…
Abstract
Purpose
The purpose of this paper is to investigate the influence of sprue distributions on the flow field and temperature field of the cladding casting process and verify the simulation results by experiments.
Design/methodology/approach
A steady-state mathematic model for the coupling of fluid flow, heat transfer and solidification to describe the process of cladding casting was present. The effect of sprue distributions on melt flow and temperature field was discussed. Based on the numerical simulation results, the cladding billet was prepared successfully. Moreover, the model has been verified against by temperature measurements during the cladding casting process.
Findings
There is a good agreement between the measured and calculated results. The homogeneity of melt flow determines the formability of cladding billets and circular temperature difference affects the bonding of the two alloys. The AA4045/AA3003 cladding billet with no defects in size of f140/f110 mm was fabricated successfully. The alloy elements diffused across the interface and formed diffusion layer with a thickness of 15 µm. The interface bonding strength is higher than the tensile strength of AA3003, indicating the metallurgical bonding between two alloys.
Research limitations/implications
The casting parameters are limited to the aluminum alloy cladding billet in size of f140/f110 mm in this paper.
Originality/value
There are few reports of cladding billet, which are used to prepare condense pipes of automotive engines. The effect of distribution schemes on the cladding casting process is rarely studied.
Details
Keywords
Ömer Akbal, Hakan F. Öztop and Nidal H. Abu-Hamdeh
The purpose of this paper is to make a three-dimensional computational analysis of melting in corrugated pipe inserted system filled with phase change material (PCM). The system…
Abstract
Purpose
The purpose of this paper is to make a three-dimensional computational analysis of melting in corrugated pipe inserted system filled with phase change material (PCM). The system was heated from the inner pipe, and temperature of the outer pipe was lower than that of inner pipe. Different geometrical ratio cases and two different temperature differences were tested for their effect on melting time.
Design/methodology/approach
A computational analysis through a pipe with corrugated pipe filled with PCM is analyzed. Finite volume method was applied with the SIMPLE algorithm method to solve the governing equations.
Findings
The results indicate that the geometrical parameters can be used to control the melting time inside the heat exchanger which, in turn, affect the energy efficiency. The fastest melting time is seen in Case 4 at the same temperature difference which is the major observation of the current work.
Originality/value
Originality of this work is to perform a three-dimensional analysis of melting of PCM in a corrugated pipe inserted pipe.
Details
Keywords
Pablo A. Caron, Marcela A. Cruchaga and Axel E. Larreteguy
The present work is a numerical study of a breaking dam problem. The purpose of this paper is to assess the effect of turbulence and surface tension models in the prediction of…
Abstract
Purpose
The present work is a numerical study of a breaking dam problem. The purpose of this paper is to assess the effect of turbulence and surface tension models in the prediction of the interface position in a long-term analysis. Additionally, dimensional effects are analyzed by carrying out both 2D and 3D simulations.
Design/methodology/approach
Finite volume simulations performed with the different models are compared between them and contrasted with numerical results computed using other numerical techniques and experimental data.
Findings
The reported numerical results are in general in good agreement with experimental results available in the literature. They are also consistent with numerical solutions of other authors obtained using different numerical techniques. The results show that the laminar simulations exhibit strong mesh size dependency, while the turbulence models seem to help in producing mesh-independent solutions. Surface tension modeling does not seem to play a relevant role in the interface evolution.
Practical implications
Model validation.
Originality/value
The value of the present work encompass the comparison of different flow conditions used to simulate a free surface problem and their validation by contrasting numerical results with experiments. Also, the results shown in the present work are a contribution to the understanding of the role of some specific aspects of the models in the simulation of the proposed problem.
Details